The KCM is a small pressure vessel that collects condensate from multiple sources and safely diffuses residual air pressure to maximize separation effectiveness in the Kaeser Condensate Filter (or any oil/water separator).
Available in two models that vent up to 4 and 8 condensate lines, the KCM is constructed from sturdy schedule 80 PVC and has a maximum pressure-at-inlet of 230 psig. Condensate lines are connected via easy push-to-connect fittings.
A venting muffler, mounting hardware, and 5 ft outlet hose are included.
Available in two models that vent up to 4 and 8 condensate lines, the KCM is constructed from sturdy schedule 80 PVC and has a maximum pressure-at-inlet of 230 psig. Condensate lines are connected via easy push-to-connect fittings.
A venting muffler, mounting hardware, and 5 ft outlet hose are included.
Unit of Measure
Specifications
|
Dimensions
|
Sizing Guidelines
|
Features and Advantages
|
Options
|
Additional Information
|
Note
Specifications
Brands |
N/A Kaeser Compressors |
Model |
N/A KCF 200 |
Condensate Inlet (Hose Connection) |
N/A 1 x 1 in3 x 1/2 in |
Water Outlet (Hose Connection) |
N/A 1 in |
Weight Empty |
N/A 70.5 lb |
Maximum Inlet Pressure |
N/A 230 psig |
Sizing Guidelines
Compressor |
N/A Reciprocating Compressors |
Maximum Ambient Temperature |
N/A 140 ºF |
Minimum Ambient Temperature |
N/A 41 ºF |
Maximum Operating Pressure at Inlet |
N/A 232 psig |
Maximum Condensate Temperature |
N/A 140 ºF |
Mineral Oils Compressor Power |
N/A 130 hp |
Synthetic Oils Compressor Power |
N/A 100 hp |
Mineral Oils Compressor Flow |
N/A 585 scfm |
Synthetic Oils Compressor Flow |
N/A 450 scfm |
Features and Advantages
Features and Advantages |
N/A
|
Options
Options |
N/A
|
Additional Information
Additional Information |
N/A
Simple installation and maintenance Kaeser's KCFs are easy to install with no electrical connections or hard piping required. Lid removal knobs make removing and replacing the single filter cartridge simple. The convenient lifting handles enable quick and clean maintenance. High performance filter KCFs are durable rotomolded from high-strength, cross-linked polyethylene and work with all compressor fluid types. The filter can then be easily fixed to the KCF casing to drain. Pre-soaking the new filter is not necessary. A disposal bag comes with each set of filters. Multiple inlet connections The KCF 25 and 50 have two inlet connections. Plastic plugs are provided to block off any unused connections. |
