Skip To Content
info@compressedairsystems.com 888-455-9033

Catalog

Request Information
Screw compressors with superior efficiency

Kaeser's direct drive rotary screw compressors range from 25 hp - 650 hp and deliver outstanding performance. Kaeser uses oversized airends specifically selected to produce the required output in flow and pressure. Compared to compressors using small, high speed, gear-driven airends, the one-to-one drive provides significant savings. With Kaeser's one-to-one drive, the airend is directly connected to the motor via a maintenance-free coupling that eliminates transmission losses.
Unit of Measure

Specifications

Brands

 N/A Kaeser Compressors

Model

 N/A HSD 550

Working Pressure

 N/A 110 psi175 psi217 psi

Complete System Flow Rate at 110 Pound Per Square Inch (psi) Working Pressure

 N/A 2534 acfm

Complete System Flow Rate at 175 Pound Per Square Inch (psi) Working Pressure

 N/A 2062 acfm

Complete System Flow Rate at 217 Pound Per Square Inch (psi) Working Pressure

 N/A 1654 acfm

Maximum Positive Pressure at 110 Pound Per Square Inch (psi) Working Pressure

 N/A 125 psi

Maximum Positive Pressure at 175 Pound Per Square Inch (psi) Working Pressure

 N/A 175 psi

Maximum Positive Pressure at 217 Pound Per Square Inch (psi) Working Pressure

 N/A 217 psi

Nominal Motor Output

 N/A 500 hp

Compressed Air Connection Thread Size

 N/A 6 in

Compressed Air Connection Thread Type

 N/A American National Standards Institute (ANSI) Class 150

Sound Pressure Level

 N/A 74 dBA

Weight at 125 Pound Per Square Inch (psi) Maximum Positive Pressure

 N/A 18082 lb

Weight at 175 Pound Per Square Inch (psi) Maximum Positive Pressure

 N/A 16010 lb

Weight at 217 Pound Per Square Inch (psi) Maximum Positive Pressure

 N/A 16081 lb

Ambient Temperature

 N/A Up to +115 ºF

Dimensions

Width

 N/A 141 in

Depth

 N/A 85 in

Height

 N/A 93 in

Additional Information

Additional Information

 N/A Our fluid-injected rotary screw compressors are the perfect choice for industrial compressed air applications. Not sure which model you need? We're happy to help you determine the right solution.

Advantages

Advantages

 N/A
  • Exceptional efficiency - IE3 and IE4 motors with premium efficiency performance provide additional energy savings.
  • Longer service life - Electronic thermal management dynamically controls the fluid temperature of our ASD - HSD series for increased energy efficiency. The ETM prevents internal condensation build up, eliminating a common cause of lubricant degradation.

Low Life Cycle Costs

Low Life Cycle Costs

 N/A Our comprehensive approach to life cycle cost management: Superior efficiency, easy operation, service-friendliness, and a global service and consulting network with fast response times.

Equipment

Complete Unit

 N/A
  • Ready to run
  • Fully automatic
  • Super soundproofing
  • Vibration-dampening
  • All panels powder-coated
  • Service-friendly design: External lubrication for motor bearings
  • Easy access to all service points
  • Each HSD incorporates two individual compressor units: Including a motor, SIGMA profile airend, Sigma Control 2 controller, separator, aftercooler, drain trap, and filtration
  • Two complete compressor modules provides maximum part-load efficiency, built-in redundancy, and reduced installation costs.

Airend

 N/A
  • Single stage with cooling fluid injection for optimal rotor cooling
  • Genuine KAESER rotary screw airend with energy-saving SIGMA profile
  • 1:1 Direct drive

Drive

 N/A
  • Directly coupled without gears
  • High-flex, maintenance-free coupling

Cooling Fluid and Air Circuit

 N/A
  • Dry air intake filter with pre-filtration
  • Inlet silencer
  • Pneumatic inlet and venting valves
  • Cooling fluid separator tank with three-stage separator system
  • Safety relief valve
  • Minimum pressure check valve

Heat Recovery (HR) (Option)

 N/A
  • Optionally available with integrated fluid/water plate-type heat exchanger and additional fluid thermostatic valve
  • External connections

Electric Motor

 N/A
  • IE4 super premium efficiency motor
  • IP 55
  • Totally enclosed fan-cooled motor (TEFC)
  • Class F insulation for greater power reserve
  • Pt100 winding temperature transducer for motor monitoring
  • External bearing lubrication

Electrical Components

 N/A
  • Control cabinet to IP 54
  • Control cabinet ventilation
  • Automatic wye-delta starter
  • Overload relays
  • Control transformer
  • Siemens frequency converter (SFC models)

Sigma Control 2

 N/A
  • "Traffic light" LED indicators show operational status at a glance
  • Easy to read display
  • 30 selectable languages
  • Soft touch keys with icons
  • Fully automated monitoring and control
  • Dual, Quadro, Vario, Dynamic, and Continuous control modes included as standard
  • Additional optional communications for: Profibus DP, Modbus, Profinet, DeviceNet, and EtherNet/IP
  • SD card slot for data-logging and updates
  • RFID reader
  • Web server
View Our Resources View Our Resources cancel