Kinequip, Inc.
Kinequip, Inc.
Buffalo
365 Old Niagara Falls Blvd.
Buffalo, NY 14228
Phone: (716) 694-5000
Fax: (716) 694-5097
Email: info@kinequip.com
Print Back
The KCM is a small pressure vessel that collects condensate from multiple sources and safely diffuses residual air pressure to maximize separation effectiveness in the Kaeser Condensate Filter (or any oil/water separator).

Available in two models that vent up to 4 and 8 condensate lines, the KCM is constructed from sturdy schedule 80 PVC and has a maximum pressure-at-inlet of 230 psig. Condensate lines are connected via easy push-to-connect fittings.

A venting muffler, mounting hardware, and 5 ft outlet hose are included.
Unit of Measure

Specifications

Brands

 N/A Kaeser Compressors

Model

 N/A KCF 100

Condensate Inlet (Hose Connection)

 N/A 1 x 1 in3 x 1/2 in

Water Outlet (Hose Connection)

 N/A 1 in

Weight Empty

 N/A 24.5 lb

Maximum Inlet Pressure

 N/A 230 psig

Dimensions

Width

 N/A 18.1 in

Depth

 N/A 20.5 in

Height

 N/A 24 in

Sizing Guidelines

Compressor

 N/A Reciprocating Compressors

Maximum Ambient Temperature

 N/A 140 ºF

Minimum Ambient Temperature

 N/A 41 ºF

Maximum Operating Pressure at Inlet

 N/A 232 psig

Maximum Condensate Temperature

 N/A 140 ºF

Mineral Oils Compressor Power

 N/A 75 hp

Synthetic Oils Compressor Power

 N/A 50 hp

Mineral Oils Compressor Flow

 N/A 338 scfm

Synthetic Oils Compressor Flow

 N/A 225 scfm

Features and Advantages

Features and Advantages

 N/A
  • Compatible with most standard lubricants.
  • Simple, reliable operation.
  • Quick and easy filter cartridge changeout.
  • No electricity required for operation.
  • Multiple units connect together to handle larger systems.
  • Multiple lines can be connected via optional manifold.
  • Disposal bag provided with each cartridge.

Options

Options

 N/A
  • High pressure relief chamber (up to 580 psig)
  • Flow splitter allows up to four (4) parallel piped units for large air flow applications
  • High condensate level alarm

Additional Information

Additional Information

 N/A Simple installation and maintenance
Kaeser's KCFs are easy to install with no electrical connections or hard piping required. Lid removal knobs make removing and replacing the single filter cartridge simple. The convenient lifting handles enable quick and clean maintenance.

High performance filter
KCFs are durable rotomolded from high-strength, cross-linked polyethylene and work with all compressor fluid types. The filter can then be easily fixed to the KCF casing to drain. Pre-soaking the new filter is not necessary. A disposal bag comes with each set of filters.

Multiple inlet connections
The KCF 25 and 50 have two inlet connections. Plastic plugs are provided to block off any unused connections.

Note

Note

 N/A Specifications are subject to change without notice.