Kinequip, Inc.
Kinequip, Inc.
Buffalo
365 Old Niagara Falls Blvd.
Buffalo, NY 14228
Phone: (716) 694-5000
Fax: (716) 694-5097
Email: info@kinequip.com
Print Back
ECO-DRAINS

ECO-DRAIN electronic condensate drains from Kaeser are highly cost-effective and reliable.

ECO-DRAIN condensate drains are available for compressor flow rates up to 3500 cfm. Kaeser also offers suitable product versions for special applications, such as aggressive condensate, working pressures up to 913 psig, as well as in vacuums or frost regions.
Unit of Measure

Specifications

Brands

 N/A Kaeser Compressors

Model

 N/A Eco-Drain 30

Maximum Capacity Compressor

 N/A 100 cfm

Maximum Capacity Dryer

 N/A 200 cfm
Maximum Capacity Filter1 N/A 1000 cfm

Minimum Working Pressure

 N/A 12 psig

Maximum Working Pressure

 N/A 230 psig

Minimum Working Temperature

 N/A 34 ºF

Maximum Working Temperature

 N/A 140 ºF

Inlet Connection Size

 N/A 1/2 in

Inlet Connection Type

 N/A National Pipe Thread (NPT)

Condensate Discharge Size

 N/A 1/4 in

Weight

 N/A 1.8 lb

Electrical Supply

Voltage

 N/A 115 V

Phase

 N/A 1

Frequency

 N/A 60 Hz

Advantages

Advantages

 N/A Zero compressed air loss:
When the ECO-DRAIN's capacitive level sensor reports attainment of the maximum condensate level, its intelligent control electronics open and close the valve diaphragm at precisely the right times - discharging collected condensate with zero compressed air loss - which, of course, saves energy.

Reliable drainage - even in soiled conditions:
The capacitive level sensor detects condensate fill level without failure-prone mechanical parts. The pilot lines to the valves always remain free of dirt. Furthermore, the use of an upstream diaphragm valve provides a remarkably large diameter. All of these features combine to deliver reliable drainage even in highly soiled conditions or with pure oil.

Straightforward maintenance - no specialist required:
The service unit for models 30, 31 and 32 supplies all maintenance parts in a single assembly. It can be locked in position and docked to the control unit with a ""click"", preventing seal replacement errors. The service unit is 100% functionally tested before delivery, provides significantly longer use intervals and can be replaced without an electronics specialist.

Features

Features

 N/A
  • Capacitance sensor activates the solenoid only when liquid is present.
  • Only clean compressed air is used to control the valve.
  • Large discharge prevents emulsification .
  • Automatically attempts to clear discharge line blockages.
  • LED indicators for power on, valve operation, and blockage alarm (except Eco-Drain 30 model).
  • Function test button.
  • 6-foot power cord with 3-prong plug.
  • Dry contacts for central alarm signaling are standard on most models.
  • 30, 31, and 32 models have quick change maintenance modules.

Note

Note

 N/A Specifications are subject to change without notice.

High pressure versions available: Eco-Drain 12 for 913 psig MAWP and Eco-Drain 13 for 362 psig MAWP
  • 1 Downstream of the dryer.