Kinequip, Inc.
Kinequip, Inc.
Buffalo
365 Old Niagara Falls Blvd.
Buffalo, NY 14228
Phone: (716) 694-5000
Fax: (716) 694-5097
Email: info@kinequip.com
Print Back
Your ticket to high-pressure performance

The N-series boosters are available with one, two or three cylinders.
Unit of Measure

Specifications

Brands

 N/A Kaeser Compressors

Model

 N/A N 351 110/360 psig

Inlet Pressure

 N/A 110 psig

Outlet Pressure

 N/A 360 psig

Complete System Flow Rate at Working Pressure

 N/A 91 acfm

Intake Volume

 N/A 116 ft³/min

Piston Displacement

 N/A 13 ft³/min

Compressor Block/Airend Speed

 N/A 950 rpm

Number of Pistons

 N/A 2

Nominal Motor Output

 N/A 15 hp

Sound Pressure Level

 N/A 77 dBA

Compressed Air Connection Inlet Thread Size

 N/A 3/4 in

Compressed Air Connection Inlet Thread Type

 N/A National Pipe Thread (NPT)

Compressed Air Connection Outlet Thread Size

 N/A 3/4 in

Compressed Air Connection Outlet Thread Type

 N/A National Pipe Thread (NPT)

Weight

 N/A 915 lb

Dimensions

Width

 N/A 61 in

Depth

 N/A 34.6 in

Height

 N/A 40.2 in

Advantages

Advantages

 N/A
  • Continuous high pressure operation - Innovative features such as oil pressure lubrication and intensified cylinder cooling ensure both long service life and low maintenance requirements as well as continuous system-compatible maximum pressure of 650 psig.
  • Exceptionally low oil requirement - The high quality cylinders are plateau-honed and feature an extra layer of wear protection. These details ensure low oil consumption over the entire service life.
  • For especially cool compressed air - The compressed air aftercoolers on the three-cylinder boosters are equipped with separate fans, which ensure low compressed air discharge temperatures. The boosters can be additionally equipped with water-cooled aftercoolers to attain even lower temperatures.

Energy Cost Savings

Energy Cost Savings

 N/A High quality premium efficiency electric motors deliver unparalleled efficiency for remarkably low power consumption. Their low operating temperature provides an added advantage.

Versions

For Lower Demand

 N/A The smaller models in this range are best suited to applications where low flow rates are needed at pressures up to 580 psig. These compressors are equipped with one- or two-cylinder compressor blocks and are driven by high efficiency motors with up to 5 hp capacity. The quality of these units is second to none as all compressor blocks are designed, manufactured and assembled by KAESER.

For Medium to Large Demand

 N/A When greater air flow rates are needed at pressures up to 650 psig then the mid-size and larger of the Kaeser booster models are the natural choice. At the heart of every one of these powerhouses is a precision machined two- or three-cylinder compressor block that delivers exceptional efficiency. Premium-efficiency electric drive motors up to 25 hp provide optimal energy efficiency.

The N 2001 G air-cooled versions are equipped with a separate fan-assisted aftercooler to keep the temperature differential between the inlet and compressed air (ΔT) within close tolerances. To ensure optimal cooling performance with a ΔT value of only approximately 5 K even at high ambient temperatures, the N 2001 G models can be equipped with a water-cooled compressed air aftercooler.